- Fits most 32" to 60 flat panel screens; VESA compatible up to VESA710x475
- Supports screens up to 165 lbs; Solid sturdy wall plate provides strength and durability
- Rail design allows TV to shift left and right for TV placement adjustment; Adjustable 15 degree of forward tilt
- Content: TV wall mount, high-speed 7 ft V1.3C HDMI cable, 6" 3-Axis Magnetic Bubble Level and standard hardware pack
- VideoSecu TV wall mount. Report to Amazon if received counterfeit mount not in VideoSecu box
The VideoSecu MP501B is compatible with LED, LCD, and Plasma TVs and other flat panel display between 32 and 60 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28" apart horizontally and up to 17.7" vertically). Over 12 lbs solid heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Viewing angle can be adjusted by tilt 0-15 degree forward. TV is positioned just 2.2" profile from the wall for a clean, low-profile appearance. Lift and lock safety system secure the display in position as needed. How to ensure the mount compliance with your select
List Price: $ 159.99
Price: $ 20.00
You might like this
Solid mount and a good bargain.,
Mounted my Samsung 50″ plasma using this mount. My display is about 70 pounds.
Installation was fairly simple. The back plate is 30 inches wide, so you will only be able to get 2 studs max. Important points:
1. It is very important to make sure the lag bolts drill into the studs.
2. The included hardware is iffy, so go spend the $5 at your local hardware store and get some better bolts.
3. The level on the back plate is not 100% accurate, so make sure to use your own.
The important thing to to measure where you want your holes and then measure them again and then make sure everything is level.
The construction of the mount and rails felt very sturdy.
For those that have never mounted a tv before there are 2 parts. A back plate that bolts on to your wall and then 2 rails that bolt onto the back of your display. You then place your display on the backplate. The rails have hooks to secure it onto the plate and then screws at the bottom to make sure it doesn’t come off.
Distance between the back of the display and the wall is about 2.25 inches. This is fairly tight and makes it difficult to hook up cables, so make sure your cables are hooked up before mounting the display.
Was this review helpful to you?
|PURCHASE THIS MOUNT!,
I originally purchased a mount from Best Buy for almost $200 and when I got it home I decided to check Amazon for a better deal.
This was the outcome of a very short search. I ordered this mount and it showed up at my house in two days. This item is very well made and nicely finished in flat black powdercoat. I hung a 52″ lcd on it in about 1/2 hour time.
DO NOT spend $200 on a wall mount!
By the way….the Best Buy mount went back the next day.
Was this review helpful to you?
|